Running the day: late entries, scoring and live results

On the day you run the event from the published running order: start the day, fit in late riders, handle scratchings and breaks, check gear and helpers in, score each ride and keep riders up to date.

"Live" is a state of the schedule, not the event. Each day's schedule goes live when you start it and closes when you mark it complete, all on the event's Event Scheduling page.

On this page

Before you start

Start the day

  1. Open your event and tap the Scheduling tile.
  2. Select the day's schedule (in Preview & Adjust, or on the Saved Schedules tab).
  3. Tap Start Event Day.

The schedule moves from Published to In-Progress. Only one schedule per day can be live: starting one demotes any other live schedule for the same date. Rider View opens the running order as riders see it.

While a schedule is live you can change it without unpublishing it. Changes you save stay visible to riders straight away.

Fit in a late entry

Riders entered for the day who aren't in the order are listed under Needs fitting in.

  1. Tap Add to draw beside the rider.
  2. If you have several rings, choose the Ring.
  3. Tap Add to running order. The rider goes to the end of their class block, and the riders after them move down.
  4. Use the ↑ ↓ buttons to move the rider into position.
  5. Tap Save Changes. A bridle or competitor number is allocated when you save.

Handle a scratching

You scratch a rider from their registration, opened from the Entry List. See Scratching an entry or a class.

A rider scratched after the draw is published stays in the order, struck through with a SCRATCHED badge, so their draw number isn't reused. They appear in the Scratched list beside the draw. The times of the riders after them don't change unless you ask: when you scratch a single class, tick Re-arrange timings on live draw to pull the following riders in that ring earlier and close the gap.

Add a judge break or an arena change

  1. In Preview & Adjust, tap Add judge break or Add arena / obstacle change.
  2. Choose the Ring (when there is more than one) and where to Insert the break.
  3. Set the Duration (minutes) and, if you like, a label.
  4. Tap Insert, then Save Changes.

Every following rider's start and end time in that ring shifts. To move a whole ring later, change its start time under Rings, judges & start times: every rider and break in that ring moves by the same amount.

Tell riders the order changed

When you save a change to a live schedule, Horsify asks Update all riders?

  1. Tick Email, Push notification, or both.
  2. Tap Notify riders, or Don't notify to leave it.

Only riders with event updates turned on are contacted.

Check gear at the warm-up

The Gear check button at the top of the scheduling page opens the steward's gear check sheet.

  1. Choose the Day / Schedule (when there is more than one) and the Arena / Ring, or All arenas.
  2. Check the preview: it lists who will appear on the sheet, in draw order.
  3. Tap Print / Export PDF.

The printed sheet has Helmet (tagged) and Cleared tick boxes, and blank Steward and Notes columns, so the gear steward can mark each combination off by hand.

A scratched ride stays on the sheet and its preview, crossed out and marked (SCR), so the steward knows not to wait for it. That covers every way a ride is scratched: the class entry scratched from the entry list (or by the rider), the whole entry withdrawn or cancelled, and a ride scratched on the day from a dressage score sheet. Print the sheet again after late scratchings to pick them up.

Check helpers in

If you rostered helpers, the Day board tab on the event's Helpers page is the running sheet for them. Tap in as each person arrives, ✓ when the job is done and ✗ for a no-show. See Run the day board in Rostering helpers for your event.

Score as the classes run

Results can be entered once a schedule for the event is published, in progress or completed, so entries appear in draw order ready to score.

Watch: Dressage pencilling on an iPad (1:56)
▶ Watch: Dressage pencilling on an iPad (1:56)

The Dressage Scoring dashboard with tiles counting score sheets, Draft, Submitted, Locked and available tests, a Create score sheet form (session, division, entry, test template, judge), and a list of assigned score sheets showing each competitor, test, judge and status with Open and PDF buttons

A judge's dressage score sheet showing the Movements, Collective Marks and Review tabs, a movement navigator numbered 1 to 13 with each mark, the current movement with its directive and coefficient, a 0 to 10 mark pad with 7 selected, Previous, Save and Next buttons, and a Notes panel with typed notes, shorthand chips and a handwriting area

Show live results

What riders and spectators see during the day depends on the event's Provisional results visibility, at the top of the Results page:

  • Set to Public, provisional results appear on the public results page as they're judged, badged as provisional.
  • Otherwise the public results page shows results only as you finalise them, so the live public view during the day is the running order (and your season leaderboard).

While a judge has a ride's dressage score sheet open, riders see In the ring now above the draw on their running order. A judge scoring on paper or offline doesn't show there.

Choosing the setting and finalising results are in Entering and publishing event results.

Finish the day

When the day's last class has run, tap Mark Complete on the schedule. A completed schedule is locked: it is the record of the day and can't be changed. Then finalise the results.

Related guides


Still need a hand? Open the Help bubble at the bottom of any Horsify page to ask a question or send us a message, or email support@horsify.com.au.
More guides on this topic: On the day: scoring and results.
Tags
Building and publishing the running order
Rostering helpers for your event