Set up your club's helper jobs once, ask riders to put their hand up as they enter, then build a roster against the published running order and send every helper their own jobs. Horsify splits long jobs into shifts, fills the slots for you and warns you when someone is rostered over, or too close to, their own ride.
| On this page |
Before you start
- Your club's job list (People → Helper Tasks) needs an admin, or staff with Events and entries at Manage. Staff don't have the Helper Tasks tab in their menu, so they open it at www.horsify.com.au/organiser/helper-tasks.
- An event's Helpers page is open to admins, staff with Events and entries, and that event's Event team. See Staff access: who can do what.
- Publish the running order before you roster. Until it is published, clashes can't be checked and jobs can't be pinned to a ring's real hours. See Building and publishing the running order.
Set up your club's helper jobs
-
In the organiser menu, choose People, then the Helper Tasks tab along the top.
-
Check the list. Horsify starts you off with common jobs (Gate steward, Pencil / scribe, Timer, Gear check, Canteen / BBQ, Poo patrol and more). The list is shared by every event your club runs.
To add a job, scroll to Add a helper task, type the Name (for example First aid officer) and, if you like, a Default length in minutes.
-
Click Add task.
The Default length is a rough idea of how long the job takes. A helper put on the whole job (rather than a shift with set times) is told it takes about that long, for example "About 1h" on their My helper jobs page and in their roster email. It doesn't set the job's times, so it isn't used to check clashes: give the job a time or split it into shifts for that.
If you look after more than one organisation, switch between them on a computer by clicking the organisation's name at the top of the side menu and choosing one under Organisations. On a phone, tap the small tab on the right edge of the screen to open the menu and use its Switch list. The page follows the organisation you pick.
Jobs that aren't part of an event, such as a working bee at the grounds, go on the Work Parties tab instead. See Running working bees and work parties.
Change or remove a job
Each job has three buttons:
- Deactivate / Activate switches the job between Active and Inactive. An inactive job is hidden from new event setup without being deleted.
- Edit changes the name, description or default length. The dialog also has Kind, Usually done by and Where it's offered (Events (helpers) and Staff roster), which matter if your club also uses the staff roster. Every field is explained in Yard jobs, tasks and the day board.
- Delete removes the job from your list.
| Note: Horsify won't delete a job one of your events is using. Remove it from the event first, or mark it Inactive. |
Add helper jobs to an event
-
Open the event's Scheduling page and click Helpers in the row of buttons above the tabs.
The Helpers page has three tabs: Jobs & sign-ups, Roster & publish and Day board.
-
On Jobs & sign-ups, under Ask entrants to help, pick a mode:
- Don't ask: riders see no helpers step.
- Ask (optional): riders see the helpers step but can skip it.
- Require an answer: riders must pick a job or say they can't help before they can finish entering.
Under Jobs needed for this event → Add a job, choose a job from your club's list, or + Something else… for a one-off job and type its Job name.
-
Set # needed, then click Add job. The job appears with its count, for example 3 × Gate steward.
-
To add detail, click Edit on a job and set the # needed, the Day (for a multi-day event), From / To times and Notes. Untick Show to riders at entry to keep a job hidden while you plan it.
| Tip: You don't have to set times here. Once the running order is published, Split into shifts sets them from the real ring hours. Do set a time for jobs that aren't tied to a ring (a 3:00 pm to 5:00 pm pack-up, say), because a job with no time can't be checked against anyone's rides. |
What entrants see when they enter
When an event asks for helpers, riders see a Helpers panel in the cart beside their classes. They can tick any jobs they're happy to do (each shows its day and time), tick that they can't help this time, and add a note such as only available after my ride. Their answers appear on the Roster & publish tab.
Split jobs into shifts
Open the Roster & publish tab. The status bar along the top shows:
- Slots filled: how many slots have someone on them.
- Can't do it: people rostered over one of their own rides, or onto two jobs at the same time.
- Tight turnaround: people rostered so close to a ride that they won't realistically make it.
- Roster: Draft, Published, or Published · changes pending (you've changed it since you last sent it).
Under it, Riders need … minutes either side of a ride sets how long a rider needs around their own ride (tacking up, warming up, cooling down, getting to the job) before they can be rostered. The default is 45 minutes. Lower it for a small one-ring event; raise it if your grounds are spread out.
Split a long job so nobody does the whole day:
- Click Split into shifts on the job.
- Choose what to Cover: a ring (Horsify offers each ring's real running hours from the published schedule, plus 30 minutes either side for set-up and pack-down), or Set the times myself….
- Choose the Shift length: one, one and a half, two, three or four hours, or a single shift for the whole window.
- Set People per shift.
Horsify cuts the window into back-to-back shifts. A leftover tail too short to be a real shift is added to the one before it, so nobody is rostered for the last 11 minutes of the day. Each shift gets its own row, with its window, length, filled/needed count and people.
| Important: Splitting replaces any existing shifts on that job and clears everyone currently rostered to it. Split first, then fill. Once a job has shifts, the button reads Re-split into shifts. |
| Tip: Two-hour shifts suit most club events. People volunteer far more readily for "9 to 11" than for "the day". |
Fill the slots
The Volunteers panel lists everyone who signed up, the job they asked for and their ride times. Riders who declined are under Can't help this time.
To fill slots by hand, click Add helpers on a shift and tick one or more people. The list shows:
- Entrants: people who volunteered for that job first, marked with a star, then everyone else, those with the fewest jobs first. Each name shows how many jobs and rides they have.
- Staff: with what the staff roster already has them on that day ("On shift 8:00am–4:00pm · Coaching"), so you don't put the coach on the gate during her lessons.
- Committee: from People → Committee.
- Typed in for other shifts, once you've typed a name in elsewhere.
Staff and committee are checked against their other helper jobs only, not against rides.
Someone not on any list (a parent, a friend, a rider's representative) can be typed in under Someone not in the list. A typed name is stored as a name only: it is not emailed or reminded, has no rides to check and earns no volunteer credit. The same typed name on two shifts counts as one person, so overlapping shifts are still flagged. A typed name that matches someone on the list ticks that person instead.
One person can do two shifts of the same job as long as they don't overlap, but can't be on the same shift twice. To take someone off, click the × beside their name. Nobody is told anything while you build the roster.
Fill everything with Auto-fill
- Click Auto-fill.
- Set Max jobs per person (2 to start with). Untick Allow tight turnarounds (ticked to start with) to refuse anyone who would be cutting it fine around a ride.
- Click Preview, check the plan, then Apply. Anything it couldn't fill is listed with the reason.
Auto-fill:
- gives people who volunteered for a job that job first, and always picks volunteers before non-volunteers for the same slot
- also uses entrants who didn't opt out, your staff and your committee
- never uses anyone who said they can't help this time
- never rosters anyone over their own ride or onto two jobs at the same time
- fills the hardest slots first, so flexible helpers aren't used up on the easy ones
- spreads the work: someone already down for two jobs isn't picked over someone with none.
Clash warnings
Names on the roster are colour-coded:
- Red with a triangle: they can't do it. The job runs over one of their rides, or they're on another job at the same time. The detail underneath says which.
- Amber with a clock: a tight turnaround, for example "Only 20 min before their ride at 12:20 pm in ring 1", followed by how many minutes the buffer needs.
- Plain: no problem found.
Horsify reads ride times from the published running order, using the interval it was built with, and merges back-to-back rides into one block: five 8-minute rides in a row is a 40-minute commitment. You can still roster someone who is flagged; the warnings guide you while you build.
Publish the roster
- Click Publish roster.
- Read what Horsify reports:
- A red box headed Not published lists anyone rostered over their own ride or onto two jobs at the same time, and any slot still unfilled.
- Worth knowing lists tight turnarounds, jobs with no day or time (those helpers won't be told when to turn up) and a missing published running order (ride clashes haven't been checked). These don't stop it publishing.
- Leave Email everyone their jobs ticked unless you have a reason not to: untick it and the roster is confirmed silently, with nobody told.
- Click Publish. If Horsify listed problems to fix, the button is Publish anyway: fix them first, or click it to publish the roster as it stands.
Publishing:
- confirms every proposed assignment
- emails each helper their own jobs only (job, day, time, how long and which ring), when Email everyone their jobs is ticked
- gives each helper their My helper jobs page for the event, linked from the email, which stays up to date.
Anyone who has already declined a job is left alone. If you change the roster afterwards, the status bar shows Published · changes pending: click Re-publish to send the updated jobs.
Once the roster is published, helpers are reminded the evening before and half an hour before a timed job, and can say Can't make it from their My jobs page. You're told, and the slot opens again.
Run the day board
The Day board tab is the running sheet for the day. Each day is a timeline: jobs down the side, hours across, and the rings' running windows shaded behind, so you can see the gate is covered while Ring 2 runs. Each person on a job is a chip:
- tap in as they arrive
- tap ✓ when the job is done
- tap ✗ if they didn't turn up. A no-show reads as an open slot again.
When someone doesn't show, use Who's free at… on the right. Pick the day and a window, and Horsify lists everyone who could do it, best fit first, using the same judgement as Auto-fill: entrants are checked against their rides, and anyone already busy then, or who said they can't help, is left out. Pick a slot from Put on… and they're rostered.
Volunteer credit for helpers
When you mark a member's job done on the Day board, Horsify can write their volunteer claim for them, if your club has switched that on in its volunteer claim settings. The claim is a custom claim named after the job. Entrants who aren't members, and members without a Horsify login, earn nothing. The settings and how the hours are worked out are in Volunteer hours and club credit.
Questions and answers
Can riders help with more than one job?
Yes. They can tick as many jobs as they like at entry, and you can roster them on more than one.
Does rostering someone tell them?
Not while you build the roster, so you can move people freely. Nobody is told anything until you click Publish roster.
If something goes wrong
| What you see | What to do |
|---|---|
| Riders aren't asked to help when they enter | Set Ask entrants to help to Ask (optional) or Require an answer, and check at least one job is added with Show to riders at entry ticked. |
| No clash warnings appear, or the board says clashes can't be checked | The jobs have no day and time (the status bar and a banner say how many slots), or the running order is still a draft: a saved draft doesn't count. Use Split into shifts, or give the job a Day and From / To time, and publish the running order, then reopen the tab. |
| The roster won't publish | Clear the red flags by moving those people to another shift, run Auto-fill or lower the count on shifts you can run short-handed. Or click Publish anyway. |
| A helper didn't get their jobs | The roster went out with Email everyone their jobs unticked, their entry has no email address, or they were added after publishing. If the status bar says Published · changes pending, click Re-publish, or send them the link to their My helper jobs page. |
| A job won't delete from the club list | An event is using it. Remove it from that event's Jobs needed list first, or mark it Inactive. |
Related guides
- Building and publishing the running order
- Running the day: late entries, scoring and live results
- Volunteer hours and club credit
- Running working bees and work parties
- Your committee and who can manage the club
|
Still need a hand? Open the Help bubble at the bottom of any Horsify page to ask a question or send us a message, or email support@horsify.com.au. More guides on this topic: On the day: scoring and results. |