On the day you run the event from the published running order: start the day, fit in late riders, handle scratchings and breaks, check gear and helpers in, score each ride and keep riders up to date.
"Live" is a state of the schedule, not the event. Each day's schedule goes live when you start it and closes when you mark it complete, all on the event's Event Scheduling page.
| On this page |
Before you start
- The day's running order must be published. See Building and publishing the running order.
- You need to be an admin of the organisation, staff with Events and entries at Manage, or on the event's Event team. See Staff access: who can do what.
Start the day
- Open your event and tap the Scheduling tile.
- Select the day's schedule (in Preview & Adjust, or on the Saved Schedules tab).
- Tap Start Event Day.
The schedule moves from Published to In-Progress. Only one schedule per day can be live: starting one demotes any other live schedule for the same date. Rider View opens the running order as riders see it.
While a schedule is live you can change it without unpublishing it. Changes you save stay visible to riders straight away.
Fit in a late entry
Riders entered for the day who aren't in the order are listed under Needs fitting in.
- Tap Add to draw beside the rider.
- If you have several rings, choose the Ring.
- Tap Add to running order. The rider goes to the end of their class block, and the riders after them move down.
- Use the ↑ ↓ buttons to move the rider into position.
- Tap Save Changes. A bridle or competitor number is allocated when you save.
Handle a scratching
You scratch a rider from their registration, opened from the Entry List. See Scratching an entry or a class.
A rider scratched after the draw is published stays in the order, struck through with a SCRATCHED badge, so their draw number isn't reused. They appear in the Scratched list beside the draw. The times of the riders after them don't change unless you ask: when you scratch a single class, tick Re-arrange timings on live draw to pull the following riders in that ring earlier and close the gap.
Add a judge break or an arena change
- In Preview & Adjust, tap Add judge break or Add arena / obstacle change.
- Choose the Ring (when there is more than one) and where to Insert the break.
- Set the Duration (minutes) and, if you like, a label.
- Tap Insert, then Save Changes.
Every following rider's start and end time in that ring shifts. To move a whole ring later, change its start time under Rings, judges & start times: every rider and break in that ring moves by the same amount.
Tell riders the order changed
When you save a change to a live schedule, Horsify asks Update all riders?
- Tick Email, Push notification, or both.
- Tap Notify riders, or Don't notify to leave it.
Only riders with event updates turned on are contacted.
Check gear at the warm-up
The Gear check button at the top of the scheduling page opens the steward's gear check sheet.
- Choose the Day / Schedule (when there is more than one) and the Arena / Ring, or All arenas.
- Check the preview: it lists who will appear on the sheet, in draw order.
- Tap Print / Export PDF.
The printed sheet has Helmet (tagged) and Cleared tick boxes, and blank Steward and Notes columns, so the gear steward can mark each combination off by hand.
A scratched ride stays on the sheet and its preview, crossed out and marked (SCR), so the steward knows not to wait for it. That covers every way a ride is scratched: the class entry scratched from the entry list (or by the rider), the whole entry withdrawn or cancelled, and a ride scratched on the day from a dressage score sheet. Print the sheet again after late scratchings to pick them up.
Check helpers in
If you rostered helpers, the Day board tab on the event's Helpers page is the running sheet for them. Tap in as each person arrives, ✓ when the job is done and ✗ for a no-show. See Run the day board in Rostering helpers for your event.
Score as the classes run
Results can be entered once a schedule for the event is published, in progress or completed, so entries appear in draw order ready to score.
▶ Watch: Dressage pencilling on an iPad (1:56)
- Dressage is scored on a digital score sheet for each ride. On the Dressage scoring page, Score by ring has a button for each ring (and each judge on a panel): Start opens the ring's first ride, and later Continue opens the next ride still to score. Sheets go from Draft to Submitted to Locked. See Setting up dressage scoring for your event and Dressage pencilling: a guide for pencillers.
- No signal at the arena? Judges can score offline in the Horsify app. See Judging dressage offline.
- Judging on paper? Print the sheets with their QR codes and scan them afterwards. See Scanning paper score sheets with PaperSync.
- Every other class is scored on the event's Results page: by hand with Add Result, or from a scoring sheet you import. See Entering and publishing event results.
Show live results
What riders and spectators see during the day depends on the event's Provisional results visibility, at the top of the Results page:
- Set to Public, provisional results appear on the public results page as they're judged, badged as provisional.
- Otherwise the public results page shows results only as you finalise them, so the live public view during the day is the running order (and your season leaderboard).
While a judge has a ride's dressage score sheet open, riders see In the ring now above the draw on their running order. A judge scoring on paper or offline doesn't show there.
Choosing the setting and finalising results are in Entering and publishing event results.
Finish the day
When the day's last class has run, tap Mark Complete on the schedule. A completed schedule is locked: it is the record of the day and can't be changed. Then finalise the results.
Related guides
- Entering and publishing event results
- Building and publishing the running order
- Setting up dressage scoring for your event
- Scratching an entry or a class
- Rostering helpers for your event
- Running an event from start to finish
|
Still need a hand? Open the Help bubble at the bottom of any Horsify page to ask a question or send us a message, or email support@horsify.com.au. More guides on this topic: On the day: scoring and results. |