Approving hours and exporting to payroll

The Staff Roster turns rostered hours into approved hours and a file your payroll system imports, without anyone retyping a paper timesheet. Horsify deliberately stops at hours × base rate: award interpretation, penalty rates, superannuation, tax and payslips stay in Xero, MYOB, KeyPay or whichever payroll system you already use.

Watch: Your first pay run (1:12)
▶ Watch: Your first pay run (1:12)

On this page

Before you start

  • To see rates, the Pay period tab and the export, and to approve hours, you need the right access: see Who can use the roster and see pay in Setting up your staff roster.
  • Check A pay period starts on on the Settings tab before your first pay run, so Horsify's periods line up with yours.

Your first pay run: the short version

  1. Staff tab: give everyone a base hourly rate (and their payroll employee ID if you have one). Without a rate Horsify still counts hours, but every cost figure stays blank.
  2. Roster tab: fill the week, from templates or by hand, then press Publish week. Staff with a linked login or an email address are told about their shifts. See Rostering the week.
  3. After each shift: record what was actually worked. Staff do it themselves on My day (or you do it from the shift). A shift nobody records is paid at its planned hours when you approve it.
  4. Pay period tab: chase the Missing times column, then press Approve all. Approving locks each shift and captures the rate.
  5. Export CSV for payroll and import it into Xero, MYOB or KeyPay.

The sections below go through each one.

Record the hours actually worked

Planned hours are what you intended. Actual hours are what you pay.

  • Staff record their own on My day (the timesheet under each shift). Send them Your shifts, jobs and hours on My day.
  • You can record anyone's: open the shift, expand Actual times worked, then enter started, finished and break. This works whether or not staff self-service is switched on, so you are never locked out of your own payroll.

Horsify refuses a timesheet that adds up to nothing (identical start and finish, or a break longer than the hours).

A shift with no actual times is not a problem. It approves at its planned hours, which is the right answer for salaried and part-time staff who work exactly what was rostered.

Approve

Approval is the moment hours become pay. It does three things:

  1. Locks the shift. An approved shift cannot be edited, deleted, or given new times, and its stretches cannot be changed. Press Withdraw approval first if you need to change something.
  2. Captures the pay rate. The rate on file at that moment is stored on the shift. Give someone a raise next month and last fortnight is still costed at what you signed off; a rate change never rewrites a closed period. To pick up a new rate on a shift, withdraw its approval and approve it again.
  3. Puts it in the export.

There are three ways to approve:

  • Approve on a single shift (in the shift's panel or the shift editor).
  • Approve week in the Roster tab's Actions menu.
  • Approve all on the Pay period tab.

Approve week and Approve all first ask you to confirm (Approve shifts, then Approve). Shifts without actual times are approved at their planned hours.

Note: Shifts in the future are skipped, not approved. If nothing has happened yet there is nothing to sign off, and Horsify tells you how many it skipped rather than silently approving next week's roster. A future shift someone has already reported times for approves normally.

Check the pay period

The Pay period tab is the fortnight (or week, or four weeks) as payroll will see it. Move between periods with the arrows, or Current.

The Pay period tab for a closed fortnight: four tiles, then a row per person with payroll ID, planned, actual and approved hours, rate, cost and missing times, and Shifts awaiting approval underneath, empty once everything is approved

Four tiles across the top show approved hours, estimated gross cost, how many shifts are awaiting approval, and how many staff are rostered. Then there is a row per person:

Column What it tells you
Shifts How many shifts they have in this period.
Planned Hours as rostered.
Actual Hours from shifts where times were recorded.
Approved Hours you have signed off. This is what gets paid.
Rate Their current base hourly rate.
Est. cost The cost of the approved shifts at the rate each was approved at. Unapproved shifts are not costed, so a period that hasn't happened yet always shows no cost. To estimate a coming fortnight, multiply the Planned hours by the rate.
Missing times Past shifts with neither actual times nor approval. This is your chase list.

Underneath, Shifts awaiting approval lists every shift up to and including today that is still unapproved, each with Enter times and Approve beside it, so a pay run is a single pass down one list. Approve all approves exactly this list.

Export for payroll

  1. On the Pay period tab, leave Approved only ticked (the default), or untick it to include everything. Unapproved rows are then marked No in the Approved column so nobody pays them by accident.
  2. Press Export CSV for payroll. The period downloads as a spreadsheet file.
  3. Import it into your payroll system.

The file has one row per shift:

Employee ID, Employee name, Role, Employment type, Date, Start, End, Break (min), Hours, Rate, Amount, Approved, Pay period start, Pay period end, Notes, Shift role/task

followed by a TOTALS block with one row per employee. Where actual times were recorded, the Start, End and Break columns carry the actual ones: the file always reflects what you are paying, not what you planned.

  • File name and formats: the file is named after the period (timesheets-2026-11-02-to-2026-11-15.csv). Dates are written year first, times in 24-hour form, and Hours, Rate and Amount to two decimal places (7 h 30 min is 7.50).
  • Codes: Role and Employment type use Horsify's own codes, such as StableHand and PartTime, so map those once in your import. In the TOTALS block, Rate reads mixed for someone paid at more than one rate in the period.
  • Role and Shift role/task: Role is the person's main role, which is what payroll maps to a pay item. Shift role/task is the label on that individual shift, or the summary of its stretches, so a split day shows as "AM Stables" and "AM Admin" on two lines, and a split shift as "Coaching · PM Stables" on one. A split shift is always one line of pay.
  • Notes: the Notes column carries the staff member's note about their hours if they left one when they submitted their times, and otherwise your note for staff on the shift, so an explanation for an unusual number of hours reaches whoever checks the pay run.
  • Import mapping: column names match what Xero, MYOB and KeyPay timesheet imports expect. Save your import mapping once and every future period drops straight in. Columns are only ever added on the end, so an existing mapping keeps working.

Horsify has no direct connection to Xero or MYOB payroll: the CSV is the handover. Staff record their hours on My day; there is no clock-in. The roster and export date range is up to 93 days.

What Horsify does not do

These stay with your payroll system, which already does them properly:

  • Award interpretation, penalty rates, overtime loading, allowances
  • Superannuation, tax, Single Touch Payroll, payslips
  • Leave balances and leave requests
  • Paying anybody: the export is the handover point

If something goes wrong

"Approved shifts can't be edited"

The pay run has already used it. Open the shift and press Withdraw approval, make the change, then approve again.

The estimated cost is blank

Either nobody in the period has a base hourly rate (add rates on the Staff tab), or nothing in the period is approved yet. Cost only counts approved shifts, so a future or unapproved period always reads blank.

Missing times keeps counting a shift I've dealt with

Missing times counts past shifts with neither actual times nor approval. Either enter the times or approve it at planned hours.

Rates and the Pay period tab are blank for me

You have the Staff roster area at View only. Ask an admin for the access in Before you start.

Related guides


Still need a hand? Open the Help bubble at the bottom of any Horsify page to ask a question or send us a message, or email support@horsify.com.au.
More guides on this topic: Instructors and staff.
Tags
Yard jobs, tasks and the day board
Adding and managing instructors