Course Designer: show jumping checks

A show jumping course in the Course Designer works like any other course, with the sport's own words: fences, height classes and a time allowed. This guide lists what the show jumping ruleset checks and how to clear each finding. Building the course itself is in Designing a course with the Course Designer.

On this page

Before you start

  • The event's discipline is Show Jumping, so the library, the New course dialog and the designer use fences and height classes.
  • Each show jumping class has its height set: on the Competition classes page, edit the class and set Height under Show jumping scoring.

The ruleset

New courses use the Show Jumping height classes ruleset, version 2026.2: the EA National Jumping Rules and FEI Jumping Rules in force from 1 January 2026. It has 19 height classes, from 45cm to 1.60m.

Courses designed under 2026.1 keep it. Version 2026.1 cited the FEI articles as numbered before the 2026 edition and checked only fence heights. It isn't offered for a new course, and a course already under it validates exactly as it did.

Set up the course

  1. Click New course. The dialog ticks only the heights you run: when a competition class has its height set, it ticks that height class and maps it to the class. The other height classes stay out of the way.
  2. Build the fence sequence with Add fence from library (Manage library opens the library to add fences to it).
  3. For a double or treble, click Add combination in the fence sequence, then add its elements under it from the library. A combination is one numbered obstacle, so 5A and 5B count once towards the fence count, and each element is measured and placed on the map on its own (FEI Art. 241.3.3).
  4. In the variation table, give every fence its height, and every spread its spread, for each height class, using the Height (cm) and Spread (cm) columns. A combination has a row for each element. A water jump takes a spread only.
  5. Once the course is measured, type the time allowed for each height class: the course length over the speed, rounded up to the second. The time limit is twice it (Art. 253), and riders see both.

What 2026.2 checks

Severity Rule
Error No fence over the class height (Art. 233.2); in classes of 1.45m and up a fence may stand 3cm over at the designer's discretion
Error No fence over 1.70m; a spread at most 2.00m, a triple bar 2.20m, a water jump more than 2.00m and at most 3.60m (EA), a liverpool at most 2.00m water included (Art. 233, 236)
Error A combination has at least two elements, and a triple bar is only ever its first (Art. 237)
Error Every fence has a height and every oxer, triple bar, water jump and liverpool a spread, for each height class; one Start and one Finish; every mandatory safety check signed
Warning A spread no more than a third wider than the fence is high, triple bars, water jumps and liverpools excepted (EA, Art. 232: a "should")
Warning The fence count: 6 to 10 below 60cm, 8 to 14 from 60cm. The rules leave the number of fences to the organiser (Art. 219.1), so this only asks for a second look
Warning A time allowed for each height class; the course designer's and the organiser's approval; enough equipment at the venue

Errors block publication until you fix them. Warnings block it until someone who can manage the course clicks Acknowledge beside them.

Required approvals

Show Jumping 2026.2 requires the Course Designer and the Organiser to record their approval.

The safety checklist

The 2026.2 checklist follows the 2026 rules. These checks are mandatory:

  • footing
  • safety cups on every spread (Art. 235.2)
  • every fence measured
  • combination distances of 7 to 12 m (Art. 237.1)
  • start and finish 6 to 15 m from the first and last fence, and flagged (Art. 241.2.5)
  • every fence flagged
  • the course measured on the riding line
  • emergency access
  • an inspection after setup.

Three more apply only sometimes and are optional: the course plan posted 30 minutes before the class (Art. 241.3), the water jump's conditions, and the course designer's EA accreditation for the heights.

If something goes wrong

The New course dialog ticked every height class

None of the event's classes has a height that matches one of the 19 height classes. Set it on each class (Competition classes → edit → Show jumping scoring → Height), or tick the heights yourself.

A combination has no "Place" button on the course map

A combination (5 with 5A and 5B) isn't one thing in the arena, so its parts are placed instead. A combination with no parts can be placed itself.

A fence "height has not been entered"

Fill in Height (cm) for that fence on the height class named, and Spread (cm) for a spread fence.

Related guides


Still need a hand? Open the Help bubble at the bottom of any Horsify page to ask a question or send us a message, or email support@horsify.com.au.
More guides on this topic: On the day: scoring and results.
Tags
Designing a course with the Course Designer
Course Designer: Extreme Cowboy and Working Equitation checks