Build your club's obstacles once, place them into a course, say what each division does with them, and check the course against your rulebook before riders see the version for their class. For course designers and organisers running Extreme Cowboy Racing, Working Equitation or Show Jumping, the three disciplines Horsify has a ruleset for.
The obstacle and the ride are separate things. Your club owns one Wooden Bridge. A course places it once. Novice walks across it and Intermediate halts on it. You never copy a course per division, and you never enter the same obstacle twice.
Saving is not readiness. A course only reaches riders when it passes validation, collects its sign-offs, and is explicitly published.
Before you start
- You must be an admin of the club running the event, staff with the Office preset, staff with Events and entries, or on the event's Event team. Viewing needs View; designing needs Manage. The obstacle library and the list of rulesets in the New course dialog belong to the whole club, so an Event team place on its own opens the event's courses but not the library, and it can't create a new course. See Staff access: who can do what.
- The event needs its competition classes set up first: a division is only real once it points at a class riders can enter. See Adding competition classes.
- The event's discipline should be Extreme Cowboy Racing, Working Equitation or Show Jumping. Each has its own ruleset built in. The library, the New course dialog and the designer follow the event's discipline, so a show jumping event gets fences, height classes and a time allowed without changing anything.
Open the Course Designer
Both ways in open the event's Courses page.
- On the event's Competition classes page, click Course designer in the row of buttons above the class list.
- From the event page's organiser tools, choose Courses & Obstacles.
Build your obstacle library
The library is your club's list of physical obstacles, independent of any one course, event or division.
-
On the Courses page, click Obstacle library. For a show jumping event it is the Fence library: its categories are vertical, oxer, triple bar, wall, water jump, liverpool, gate and planks, and a fence has no difficulty rating.
Each card shows the obstacle's category, the hardest rating your club will set it at, and how often it has been used, including which event used it last.
-
Click New obstacle (or Edit on a card) and fill in the form.
Save. To add photos, save first, then Edit the obstacle: the photo slot appears once it has been saved.
| Field | What it's for |
|---|---|
| Name | What everyone calls it, such as "Wooden Bridge" |
| Category | From your discipline's list (gate, bridge, water, drag, jump…). Some divisions ban certain categories, and validation enforces that |
| Max difficulty (1–5) | The hardest it can sensibly be set at. Rating a division above it raises a warning |
| Description | What the obstacle is |
| Dimensions | Its size as built, not what a course requires of it |
| Setup instructions | How the crew builds it, printed on the setup sheet |
| Safety requirements | What the crew must check, such as "Check for protruding nails; breakaway ties only" |
| Equipment needed | Items and quantities, such as "Ground pole × 4", checked against your venue's inventory |
| Photos | Pictures of it built correctly, shown on riders' course sheets |
- Equipment names must match your venue's inventory to be counted. Matching is case-insensitive, but "Ground pole" and "Ground poles" are two different items as far as the check is concerned.
- Deleting an obstacle that is in use doesn't delete it. Horsify deactivates it instead, so the courses that used it stay intact. It disappears from the pickers but stays in the record.
Record your venue's equipment
Below the library is the equipment inventory of the event's venue: what you own, and how many. It appears only when the event has a venue set. Add items here and validation tells you when a course asks for more ground poles than you own.
The list needs admin access, the Office preset, or Facilities and venues (View to see it, Manage to change it); without that it shows empty and adding an item fails. It works only for a venue your club owns or has approved management rights over. With no inventory recorded, the equipment check stays silent, so an empty list never blocks you.
Create a course and map its divisions
The Courses page lists every course for the event with its status.
-
Click New course.
Type the Course name, such as "Saturday Main Course".
Check the Discipline. It decides the words and fields you see: Extreme Cowboy says "Obstacle", Show Jumping says "Fence".
Choose the Ruleset: the rulebook the course is designed under. Horsify's rulesets are available to every club, and a club can also hold its own.
Tick the divisions this course runs for, and map each to the competition class that is that division at your event.
Create the course.
The class mapping is how a rider's entry finds their course: the rider's class leads to its division, and the division to the course. A division with no class mapped is a validation error, because nobody can ever ride it.
A new course starts as a Draft, with a Start marker, a Finish marker, and a copy of the ruleset's safety checklist.
| Important: The ruleset a course is created under is permanent. Publishing a new version of a ruleset never changes a course that already exists. Historical courses, and the results from them, keep the rules they were designed under. |
Place obstacles in order
Open the course to reach the designer. The left column is the ride sequence.
- Add an obstacle by picking it from your library and clicking Add. It goes in before Finish.
- Reorder with the up and down arrows. Numbering follows the sequence.
- Edit a placement to set the base instructions and difficulty for every division; override only the divisions that differ.
- Remove takes it out of this course. Your library keeps it.
Start and Finish are elements too. Exactly one of each is required, and they don't count towards a division's obstacle count.
Draw the course map
Under the sequence is the Course map: your arena drawn to scale, with a grid every 5 metres.
- Draw the arena. Give its length and width in metres (it starts at 60 by 30) and click Draw the arena. You can change the size later with Resize arena; anything that would end up outside a smaller arena is brought in to its edge.
- Put the obstacles on. Everything still off the map is listed beside it. Drag one onto the arena, or click Place to put it in the first clear spot. Start and Finish go on the map the same way.
- Move them where they stand. Drag an obstacle to move it, use the round handle to turn it (it snaps every 15 degrees) and the corner handles to make it longer or wider. Click one to see its exact position, and type a value if you know it: Along is metres from the left-hand end of the arena, Across is metres from the top.
- Check the route. A dashed line runs from Start through every obstacle in ride order to Finish. Pick a division above the map to see its route: an obstacle that division doesn't ride is drawn faded, and the line skips it.
Every move saves as soon as you let go (the panel says Saved). Moving an obstacle changes nothing validation checks, so a Ready course stays Ready; on a published course each move goes in the change history. Take off the map removes an obstacle from the map but not from the course. The map's numbers are the sequence numbers, so reordering the sequence moves the numbers and the route with it.
Set what each division rides
The right-hand Division variations panel has a tab for each division.
For each obstacle, on each division's tab:
| Setting | Effect |
|---|---|
| Included | Untick to take the obstacle out of this division's route. The other divisions still ride it |
| Rating | This division's difficulty rating, where the discipline uses ratings (Extreme Cowboy). Blank uses the placement's base rating |
| Instructions | What this division is asked to do. Blank uses the base instructions |
| Gait | The gait this division must show, such as walk, trot or halt, typed in. Blank means any. Shown for Extreme Cowboy and Working Equitation |
Above the table sit the division's own settings: the Competition class it is mapped to, and its time limit in seconds, which overrides the course's.
The worked example of one course serving two divisions is in Course Designer: Extreme Cowboy and Working Equitation checks. Fences, heights, spreads and combinations are in Course Designer: show jumping checks.
Fill in course settings
- Judge: the judge's name, recorded on the course. The printed judge sheet has a signature line rather than the name.
- Course time limit: the course's limit in seconds. Divisions can override it.
- Course walk starts and Course walk details: when the walk opens, and what competitors need to know (where to come in, what to stay off).
- Riders can see instructions: off hides instructions from riders but not from the judge and setup sheets.
- Riders can see the course map: on by default, it shows the map with the rider's own route on their course page. The printed sheets carry the map either way.
Complete the safety checks and approvals
Safety checklist
Your ruleset's safety checks are copied onto every course when it's created. Ticking one records who completed it and when: it's a signature, not a checkbox. Every mandatory check must be complete before the course can be published: that one is an error, not a warning. Each ruleset's checks are listed in its reference guide.
Approvals
- In Approve as, choose the role: Course Designer, Judge, Technical Official or Organiser.
- Click Record.
The approval is recorded under the signed-in person's name, kept as it was at that moment, and each role can be recorded once per course. The ruleset decides which roles are required: a missing one is a warning, so it blocks publication until someone acknowledges it.
Equipment list
The equipment list totals every obstacle's requirements against your venue's inventory: the setup crew loads the trailer from it.
Validate the course
Click Validate at any time. Horsify runs every rule in your ruleset and lists what it finds, naming the division, and the obstacle where relevant.
| Severity | Effect |
|---|---|
| Error | Blocks publication outright. Fix it |
| Warning | Blocks publication until acknowledged by someone who can manage the course. Horsify records who acknowledged it and when |
| Recommendation | Never blocks. Advice worth reading |
| Information | Never blocks |
Some warnings are legitimate: you know the extra poles are coming on the truck. Click Acknowledge beside the warning and it stops blocking; who acknowledged it and when goes in the change history. There's no field for the reason, so keep one with your event notes if your committee wants it.
Acknowledgements are tied to the rule and the division, so editing the course afterwards doesn't silently clear them, but a different rule firing is a new warning that needs its own decision.
When everything passes, the course moves to Ready. Any later change (other than on the course map) sends a Ready or Approved course back to Draft until it is validated again.
Publish the course
-
Click Publish.
-
Choose Who can see it:
Visibility Who Entrants only Riders with an active entry in one of this course's mapped classes. The default, and what most clubs want Logged-in users Anyone with a Horsify account Public Anyone, including people who aren't signed in To release it later (say 6pm the Thursday before), use Schedule for later and set the time. The time is on the event's own clock, which the dialog names (for example "In Brisbane time"), wherever you happen to be.
Confirm.
| Important: Publishing always re-validates. A course that passed validation an hour ago and has been edited since is re-checked at the moment you publish. If it now fails, publication is refused and you're told why. |
What riders see
Entrants get a View Courses button on the event page. It opens the version for the class they entered (a Novice rider never sees Intermediate's): the course map with their route, obstacle photos, the required gait, the difficulty rating and the time limit. On a phone the map scrolls sideways rather than shrinking. Approvals, safety sign-off and the change history never reach this page. On a course published to Logged-in users or Public, someone who hasn't entered one of its classes sees every division's version. Instructions switched off in course settings are hidden here but stay on the printed sheets.
Print the sheets
Five PDFs are made from the course as it stands. The rider and judge sheets are per division: pick one in Division for rider/judge sheets first.
| Sheet | For |
|---|---|
| Rider course sheet | The entry board: the course map with that division's route, then the obstacles in order, with instructions |
| Judge sheet | The judge's copy, with room to score |
| Course setup sheet | The crew building it: the course map showing where everything stands, then setup instructions and safety requirements for each obstacle |
| Equipment list | What to load |
| Safety checklist | To carry round the course on inspection |
Change a published course
A published course can still be edited. Riders see each change straight away, and every change is recorded with its old and new values, who made it and when. Open Show change history at the bottom of the designer to answer "was the water crossing in the Novice course on the day?" months later.
Unpublish takes a published course back to Draft.
| Status | Meaning |
|---|---|
| Draft | Being built. Riders never see it |
| Validation failed | The last validation run found errors |
| Ready | Validation passed; awaiting sign-off |
| Approved | Required approvals recorded |
| Published | Visible to its audience |
Clone a course
Clone on the course's card on the Courses page copies the course (obstacles, divisions, variations and settings) into a new draft on the same event, without touching the original. Use it to try a variation without losing the course you have.
The clone starts as a Draft with its safety checks unticked and no approvals. That's deliberate: a safety inspection for one course does not certify another.
A course can't be copied onto a different event, and cloning an event doesn't bring its courses. Build it again on the new event: your obstacle library carries over, so it's mostly placing the obstacles in order.
If something goes wrong
"No ruleset is published for this discipline yet."
The discipline you picked has no ruleset. Choose Extreme Cowboy Racing, Working Equitation or Show Jumping, or ask us about a club ruleset. If you're only on the event's Event team, the ruleset list can't load for you at all, so ask an admin or staff with Events and entries to create the course.
A division shows "No class mapped yet"
Add the competition class to the event first, then map the division to it. Until it's mapped, no rider can reach that course and validation reports it as an error.
The course map won't let me drag an obstacle off the edge
Nothing can stand outside the arena. If the arena is the wrong size, change it with Resize arena.
The equipment check says nothing at all
Your venue has no equipment inventory recorded. Add items in the Venue equipment panel on the obstacle library page and validate again.
Related guides
- Course Designer: show jumping checks
- Course Designer: Extreme Cowboy and Working Equitation checks
- Adding competition classes
- Running an Extreme Cowboy Racing competition
- Running an event from start to finish
|
Still need a hand? Open the Help bubble at the bottom of any Horsify page to ask a question or send us a message, or email support@horsify.com.au. More guides on this topic: On the day: scoring and results. |